SAFETY

Battery safety instructions

Agreement

Please realize that batteries might cause damages like leaking, fire or explode when misuse or defective.

It is your responsibility to double check and make sure your devices have necessary protection circuits.

When charging Battery Pack, please put battery in a fire proof container. Always charge in an isolated area, away from other flammable materials. Ex: wood bench, carpet unattended.

We are only responsible for the products we sell. We are NOT responsible for any damages and consequences damages by using our products.

Please download the IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS below.

Warning: AC Adapter Safety

Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. To select an appropriate power source for your device:

·         Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet.

·         Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit.

·         On devices where the AC prongs may be folded for storage, before plugging the AC adapter into a power outlet, make sure its prongs are fully extended.

·         On devices where the AC prongs are removable and where the power supply uses a universal adapter, before plugging the AC adapter   into a power outlet, make sure the prong assembly is of the proper configuration for the power outlet and fully seated into the adapter.

PSU DC connector

Avoid prolonged skin contact with the DC connector when the PSU is plugged into a power source because it may cause discomfort or injury. 

Sleeping or sitting on the DC connector should be avoided.

Warning: Cable and cord safety

Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords.

To avoid damaging the power cords and power supply:

·         Protect the power cords from being walked on.

·         Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply  unit, and the device.

·         Do not jerk, knot, sharply bend, or otherwise abuse the power cords.

·         Do not expose the power cords to sources of heat.

·         Keep children and pets away from the power cords. Do  not allow them to bite or chew on them.

·         When disconnecting the power cords, pull on the plug—do not pull on the cord.

·         If a power cord or power supply becomes damaged in any way, stop using it immediately.

·         Unplug your device during lightning storms or when unused for long periods of time.

For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions:

1.    Plug the AC power cord into the power supply until it seats fully.

2.    Plug the other end of the AC power cord into the wall outlet.

Please download the IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS below.